Products
FlexSnoot
FlexSnoot M 100x30

FlexSnoot M 100x30

Variants

Contact us
Contact us for a quote

Upgrade your LED panels with our new FlexSnoot. Simply attach it to the loop velcro of the compatible panels.

The multi-parted FlexSnoot is made of black matte fabric with a solid sheet of lightweight plastic. No more hassle with DIY duvetyne skirts or Black Wrap skirts. Velcroed together, they enclose the entire LED panel.

Our FlexSnoots are "Made in Germany".

This five-part FlexSnoot size M is a perfect addition to your compatible LED panels.. No more hassle with DIY duvetyne skirts or Black Wrap skirts.

Length ~100cm / 3.28ft
Width: ~30cm / 11.8"
Depth: ~50cm / 1.64ft

SKU: SNOOT10030

caligri Airdome M 100x30

Kinoflo Freestyle Air

Litegear Litemat 2L

Exalux LEDZEP Punch 1x4

Panalux Allegra 4:1.

All flat, solid LED panels with loop velcro around and dimensions around 100cm/39.4" x 30cm/11.8"

What kind of cloth do you use for the AIRTUBE?

We are using special motion picture technical fabrics from TRP Worldwide (The Rag Place). Especially Black/White Ultrabounce® and Magic Cloth®.

What are the material limits of the AIRTUBE?

The AIRTUBE is build for maximum ~12 PSI/0,83 bar. The seams of the textile will start to tear apart, when exceeding the air pressure. Be careful when using an air compressor and always keep an eye on the air pressure when inflating. The transparent body can withstand a temperature of up to 212°F/100°C. Discoloration, deformation or even holes can then appear.

There are some imperfections.

During our quality control we sort out bad materials. But maybe we simply have overlooked something. Just contact us and send us a picture. Furthermore it may happen that due to the production process there might be a crease or seam we cannot avoid.

What is the cardboard roll good for and do I need to use the protection sleeve?

We highly recommend to store the AIRTUBE gently rolled up on the cardboard roll and inside the protective sleeve to reduce kinks, wrinkles and containments.

Do you offer custom sized AIRTUBEs?

Yes. Just contact us for more details.  

For which light fixtures is the AIRTUBE intended?

The AIRTUBE is primarily intended for LED tubes, LED bars and very narrow LED panels from the film, show and TV industry. However, all types of light tubes, bars, panels and strips can be used, which can be securely fixed on the outside. You should pay attention to the fact that broken glass can damage the AIRTUBE when using Kinoflo lamps or normal fluorescent tubes and always be aware of overheating. In any case, you must not exceed the material limits of the AIRTUBE and you should always act with common sense.

Do you also offer air pumps/blower to the AIRTUBE?

Since the air valve of our AIRTUBE has a common inlet size ~0.68"/1,75cm you can use almost every air pump/blower already on the market. At the moment we do not offer a special air pump/blower.

Are you offering spare parts?

Depending on the product, we offer separate parts for exchange.

Are there any known temperature issues?

When operating in a warm environment and using the spill light cover, overheating problems can occur. Just make sure there is enough space for some air circulation.

Do you have any tips on cleaning the AIRTUBE´s outside?

Use warm water and gentle soap for the white translucent Magic Cloth® and for the black Ultrabounce® please use a multi-purpose cleaner (e.g. Formula 409 Cleaner) or warm water with gentle soap. Also a microfaber cloth is always very useful.